How To Cut Up A Mattress

How To Cut Up A Mattress

Do you find yourself tossing and turning at night or having a difficult time falling asleep on a mattress that may be uncomfortable, old, or too firm? Well, if this sounds like the case for you, then it’s time to throw it away and choose a new one. But before you decide to do it, you need to cut the mattress up.

How To Cut Up A Mattress

In this guide, we’re going to take a look at how to cut up a mattress with ease. The article will also discuss what materials are needed and why they are needed, as well as go into detail about the steps involved in cutting up your mattress.

Things You May Need To Cut Up A Mattress

Before you get started with the actual cutting process, there are a few tools and items that you’ll need to have handy. 

Some of these are:


In order to slice through the mattress, you’ll need something that can handle this task. While it would be best to use a hand saw, a circular or saber saw would be better since they can cut through larger surfaces smoothly and quickly.

Bolt Cutter

To begin removing the mattress cord, you’re going to need something that can handle that tough material. If getting rid of it isn’t an option, then using a bolt cutter would be a good option.

Storage Boxes

Once the mattress has been cut up, it can be stored in boxes. To accommodate the pieces better, you may want to consider using different box sizes, such as small, medium, and large.

Eyewear To Protect Your Eyes

You may want to protect your eyes from any possible flying particles when cutting open a mattress, so a good pair of safety glasses would be a great idea for use during this time.

Things You May Need To Cut Up A Mattress

5 Steps To Cut Up Your Mattress

Once you have completed the necessary shopping and gathering items, it’s time to proceed with actually cutting up your mattress. The following steps will show you how it’s done with ease.

Remove The Cord From The Edges

One of the first things that you’ll need is to remove the cord from the edges. This can be done simply by cutting through it with a bolt cutter.

Cut Off The Side Panels

Next, you’ll need to take off the side panels. For this, start by cutting through the edging material to be removed and then use a saw to cut around the inside of the frame.

Remove The Top And Bottom Layers

To get rid of these layers, you’re going to need a sturdy pair of scissors or another sharp object that can cut through glass-like material to create any holes or tears in the mattress during this process.

Sort The Internal Layers And Fabric

While no one wants to take apart their mattress, it’s necessary for the cutting process, and you’ll need to do this. Some internal layers can be sorted into categories like top fabric, middle fabric, or bottom fabric. By doing this, you’ll be able to get rid of those layers quickly to make space for the row cushion materials that come after these.

Carefully Cut The Metal Springs

Now, for the final step of this process, carefully cut through all of the metal springs using a bolt cutter. Be sure to do this slowly and with care so that you don’t accidentally cut yourself, causing harm to yourself in the process.


What are the main tools needed to cut a mattress?

The main tools you will need for cutting a mattress are a utility knife with a sharp blade, measuring tape, and a straight edge.

Should I wear protective gear when cutting my mattress?

It is highly recommended that you wear protective gear such as goggles, gloves, and a face mask when cutting your mattress.

What should I do to ensure a clean and straight cut?

You should use a straight edge and measure twice before making the cut to ensure a clean and straight cut.

Will I need any additional supplies to help me make the cut?

You may need additional supplies depending on the type of mattress. If you are cutting a memory foam mattress, you may need a saw to cut through the dense material.

How do I mark the cut lines on my mattress?

The best way to mark the cut lines is to use a fabric marker that will not leave any permanent color on the mattress.

What should I do if I need to make more than one cut?

If you need to make more than one cut, make sure to use a new blade for each cut to ensure a clean line for each cut.

What is the best way to begin making the cut?

Begin making the cut by pressing the blade firmly against the mattress and draw the blade slowly in a straight line.

What type of mattress should I not try to cut?

You should never try to cut a latex, spring, or hybrid mattress, as these types of mattresses may be dangerous to cut.

Can I use a saw to cut a foam mattress?

Yes, you can use a saw to cut a foam mattress; however, you must use extreme caution and ensure that you are wearing protective gear, such as goggles and a face mask.

Are there any special tools I should use for cutting a mattress?

You should use a utility knife with a sharp blade, as this will help to ensure a clean cut.

How can I make sure that the cuts on my mattress line up correctly?

Make sure to measure twice before making the cut, and use a straight edge to ensure that the cuts line up correctly.

Should I be careful of any surrounding furniture when cutting my mattress?

Yes, you should always be aware of any surrounding furniture or surfaces that can be damaged by the blade as you make the cut.

Is there anything I should do after cutting my mattress?

After cutting your mattress, it is important to dispose of any sharp cutting tools in a safe and secure manner.

Should I be careful when moving the cut pieces of the mattress?

Yes, it is important to be careful when moving the pieces as the material may be sharp and could cause injury.

Are there any other tips I should keep in mind when cutting my mattress?

Make sure to keep the blade away from yourself and others, and only cut the mattress on a hard, flat surface for a clean cut.

Nick Favreau

Nick Favreau is an expert mattress writer, whose unbiased reviews and in-depth analyses of mattresses have made him a trusted source of information for those looking for quality sleep.

We will be happy to hear your thoughts

      Leave a reply
      Enable registration in settings - general